How To Add Transmission Fluid to a 1994 Acura Legend
Adding fluid to a 1994 Acura Legend is a simple, quick and easy process. You will need the proper transmission fluid, an old rag, and a light to help see through shadows. It usually only takes a few minutes to do. You need to locate the proper dipstick for your transmission while making sure not to add transmission fluid to the oil. Take care not to overfill, it can cause damage.
- Check the owner's guide for the correct transmission fluid to use. You can purchase transmission fluid at Wal-Mart, Auto Zone, Advance Auto Parts, or any place that sells automotive products.
- Start your car and let it run for five minutes. Turn it off.
- Open the hood and check your transmission fluid level by pulling the dipstick up and wiping it off. Put the dipstick back in and pull it out again. This will show the accurate level of transmission fluid. If your stick says full do not add anymore.
- Using a funnel, insert it in the tube for the dipstick. Pour in a bit of the transmission fluid. Recheck your level.