Previous Article

How to Refinance an Infiniti Lease

Next Article

About Infiniti Cars

How to Program an Infiniti I30 Keyless Entry

Infiniti I30 is a high-end luxury car, offering remote keyless entry as a standard option. It uses Nissan electronic components in its design. Programming the keyless entry can be accomplished with a few steps. Although, when the programming mode is accessed, all computer remotes will need to be reprogrammed. This includes the preprogrammed factory remote.


  1. Begin the programming process by accessing your vehicle and closing all the car doors.


  2. Use the automatic lock button on the driver's side once inside the vehicle.


  3. Quickly insert the key into the ignition and remove it completely. This must be done in succession six times in a 10-second period. It is not necessary to turn the key in any direction during this process. Just put it in and pull it out.


  4. The emergency lights will activate and flash. If this does not happen, repeat the procedure until this occurs.


  5. The flashing lights indicate you have entered the programming mode for your remote entry. Once you have entered this mode, you will be ready for the final steps programming your remote.


  6. Place your key into the ignition and place it in the accessory position.


  7. Now depress the "unlock" button the remote once.


  8. The emergency lights will once again signal.


  9. Hit the unlock button on the driver's side door. Now press the lock button in rapid succession.


  10. Depress any of the buttons on the keyless remote to set this program for the I30.


  11. Repeat the steps above for any additional remotes you have for the vehicle. This includes the remotes originally preprogrammed for the vehicle.