Previous Article

How to Replace an Acura Legend Master Cylinder

Next Article

How to Assemble an Acura MDX Headlight

How to Put Transmission Fluid in an Acura Legend

Putting transmission fluid in an Acura Legend is part of a regular maintenance program the owner should perform on the car. It is easy to add the transmission fluid right at home. The owner will need to buy the right type of fluid in order to keep the Acura running smoothly.


  1. Leave your Acura running to check the transmission fluid. Park the car in a safe location and pop open the hood. Look for the red dipstick which is how you check the transmission fluid level. Remove the dipstick, wipe it off on a rag and then put it back in.

  2. Pull the dipstick out again and check the transmission fluid level. If you need to add some more fluid, put the dipstick in and close the hood. Drive to an auto supply store and tell a clerk that you need to buy transmission fluid for an Acura Legend. Give the clerk the year of the vehicle so you buy the correct fluid.

  3. Park your car in your driveway when you get back home and leave the engine running. Pop the hood and remove the transmission dipstick. Pour the new fluid in slowly. Once the fluid reaches the top, put the dipstick back in and shut the hood.

  4. Leave your Acura running for a few minutes and then turn the motor off. After an hour or so, drive the car for several minutes, then check the fluid level. If the fluid level is low again, you may have a leak. Look under the car to see if there is any liquid on the ground. You will be able to tell if the liquid is transmission fluid by the reddish coloring.

  5. Call your auto mechanic to take the car in for service if you have a leak. Tell the mechanic that you put in some transmission fluid once you saw the level was low. Top off the fluid again before you drive the car to the mechanic for service.