Previous Article

How To Clean a Spa Filter Cartridge

Next Article

How to Clean a Storm Drain Cleanout

How To Clean a Spectre Air Filter

Spectre is a company that makes performance components for many vehicles such as air filters. These types of filters can be reused after they are cleaned and oiled. You do not have to worry about replacing them. The company recommends that you change them after driving 7,000 miles. This may differ depending on the type of climate the vehicle is driven in. It is best to check with the instructions for the filter.

How to Clean a Spectre Air Filter


Materials Needed



  • Screwdriver

  • Spectre cleaning solution

  • Spectre oil

  • Warm water



  1. Remove the air filter from the plastic box that houses the filter. Use a screwdriver to remove the screws on the box and lift up the lid on the housing compartment.

  2. Shake the air filter to remove any loose dirt or debris. You should also tap it lightly against a hard surface.

  3. Spray the air filter with a Spectre cleaning solution. Allow the solution to penetrate the air filter for 25 minutes to break up dirt.

  4. Rinse the air filter with warm water to remove all traces of the cleaning solution. Continue rinsing the filter until the water runs clear.

  5. Place the filter in direct sunlight and allow it to dry for several hours. If it is not dry, allow it to sit until it is completely dry. It may take a while for the filter to dry.

  6. Spray the air filter with Spectre oil and allow it to penetrate. Do not over oil the filter because it may not work effectively this way.

  7. Place the air filter back into the housing compartment, close the lid and secure it with the screws.