Previous Article

How to Polish Chrome Trim

Next Article

How to Pop a Wheelie on a 4-Wheeler

How To Polish Silver Jewelry

Silver jewelry must be polished and cleaned to retain its natural lustrous beauty. Every jewelry lover who owns silver pieces appreciates and understands this. Under normal conditions silver tarnishes as it is exposed to the sulfides, which are present in the air. The piece takes on a yellowish hue then as the oxidation condition the piece will eventually turn black.

Supplies



  • Treated silver polishing cloth

  • Cotton cloth

  • Silver polish

  • Cotton Swab

  • Paper towel

  • Small bowl of warm water



Instructions:



  1. Purchase a specially treated cloth, which has cleaning agents infused in the cloth. These can be purchased at a jewelry retailer. Furthermore, some jewelry stores provide these free of charge to customers who purchase silver jewelry.

  2. Gather your supplies and your jewelry that you are going to be polishing.

  3. Spread out your paper towel on a table and place the small bowel of warm water on the paper towel.

  4. Remove the polishing cloth from its protective envelope.

  5. Firmly pick up your piece of jewelry and rub the polishing cloth over the entire surface of the silver.

  6. Dip the cotton swab into the silver polish.

  7. Use the cotton swab to clean between areas on the jewelry, which are not accessible with the jewelry polishing rag.

  8. Allow the polishing agent to stand on the piece for approximately five to 10 minutes.

  9. Use your clean cotton rag to buff off the tarnish remover solution. As you work your jewelry will return to its natural lustrous shine.

  10. Dip your jewelry into the bowl of warm water to remove any of the tarnishing removal agents, which were left behind during the buffing process

  11. Dry off your piece of jewelry with a clean paper towel or another clean cotton rag.

  12. Keep your jewelry looking great and ready to wear by establishing a monthly cleaning routine.