Previous Article

How To Repair Leather Car Seats

Next Article

How to Repair Loose Bricks in Chimney

How To Repair Leather Cracks In Car Seats

Dried and cracking leather car seats are one of the most frustrating issues that arise over the lifespan of an automobile. Not only do cracked leather seats decrease the value of the vehicle, it is also unappealing to behold. Replacing the damaged seats can become quite costly. However, there are also simple repair methods to complete with materials obtained at many auto shops.


  1. Clean the seat with warm soapy water and a brush. Pat the seat completely dry with a cloth.

  2. Use a small amount of rubbing alcohol on a paper towel to rub down the entirety of the seat to remove any lingering soap, or other contaminants that may hamper the repair project. Once the seat has been wiped down, it is best to use a clean paper towel to rub it dry.

  3. Take a sheet of sandpaper, 240-grit is recommended, and dip it into warm soapy water, then gently sand the cracked areas of the leather seat. This will cause the dye to lift. Move the lifted dye into cracked areas to serve as a filler. Do this until the leather begins to become smooth.

  4. Apply a thin layer of a plastic and leather prep formula. The plastic and leather prep formula can be found at most auto parts stores. Be sure to follow the manufacture’s instructions on the product.

  5. With a paper towel, add a thin coat of a leather and fabric sealant such as Thompson's Sport Seal. Allow this to dry completely.

  6. Cover undamaged parts of the car seat with old cloths, sheets or newspaper to protect it from being accidentally damaged as you continue.

  7. Take a leather dye that matches the damaged car seat, and apply it to the treated area. Take a blow dryer or fan to dry the initial thin coat. Once dry, add a second coat.

  8. Allow the car seat to dry completely before using the car seat. This takes roughly two to three hours on average.