Previous Article

How to Tighten a Garage Door Chain

Next Article

How to Tighten Your Eyeglasses

How To Tighten an ATV Chain

While out in the woods on your ATV, the last thing you want to deal with is a loss of performance. You need to be able to keep up especially when riding with others. A chain that is not properly tightened can affect overall performance of your machine. For this reason, you should know how to tighten the chain on your ATV before riding it at any time. 


 

When your ATV chain is not properly adjusted, your vehicle may be damaged. As normal wear and tear on the machine can affect the tension of the chain, you need to know how to make this adjustment. The only tool that will be needed is a simple wrench set. You can tighten the chain anywhere if you always carry a set with you.



  1. Make sure your ATV is parked on a flat surface.

  2. Put the gear it into neutral.

  3. Loosen the bolts securing the rear wheels of your ATV. A crescent wrench will be needed to do this.

  4. Bolts which secure the swing arm will also need to be loosened. An end wrench is used to accomplish this step.

  5. Locate the tightening bolt for the ATV chain. Turn the bolt in the appropriate direction to achieve the tautness you want. Take care not to over-tighten the chain.

  6. Repeat on the opposite side of the ATV. Try to match the chain positioning on both sides. The swing arm block is a good guide to use when tightening the chain.

  7. Replace the securing bolts. Tighten to the best of your ability by hand.

  8. Replace the rear wheels and secure the lug bolts.


 


Don't wait until you notice a problem with the performance of your ATV. Check the chain on a regular basis. By maintaining your ATV, you can ensure it has a long life and can take you everywhere you need to go.