How to Add Liquid to Lawn Mower Tires
If your lawn mower has a flat tire, it is very simple to fix. You will not need to purchase any special tools to fix the tire. You can learn how to fix a flat tire on a lawn mower by adding liquid to the tires. It is very simple to do and only takes a few minutes to complete.
Supplies
- Liquid tire repair
- Valve core tool
- Air compressor
- Cotton ball
- Move the tire on the lawn mower that is flat so that it is placed in the 10:00 position.
- Remove the air valve cap from the lawn mower tire, and insert the valve core tool into the stem. Make sure it fits tight around the valve.
- Unscrew the valve core very slow, because as the air comes out of the tire it can remove the valve core from the stem. Lay the valve core aside so you will not lose it.
- Open the repair kit you purchased. Remove the rubber tubing from the kit and place it over the tire stem. Take the tire repair liquid nozzle and insert it into the other end of the tube.
- Inject the liquid into the lawn mower tire according to the directions in your kit. Make sure you insert the correct amount of liquid into the tire.
- Remove the tubing, and clean any liquid found inside the valve stem using a cotton ball.
- Use the valve core tool to put the valve core tool back in and tighten it.
- Add air to the lawn mower tire and then put the cap back on. Drive the mower so you can rotate the tire back to the normal position.