Previous Article

Kinds of Hardwood Lumber

Next Article

How to Clean Your Car Headlights

How to Adjust Headlights

If you have a problem with your headlight not illuminating the road in front of you at night, it is more than likely that the headlights are in need of adjusting. It is not something that you would need to take your car to the shop for because you can easily do it yourself.

How to Adjust Headlights



  1. Park your car approximately 15-feet from the garage door. The front of the car should be aimed directly toward the door.

  2. Turn on the headlights for the car.

  3. Use masking tape to mark the vertical and horizontal centerlines of the headlight beams on the garage door.

  4. Use a carpenter's level to check if the lines you made are even. If the lines are uneven, use a tape measure to determine how much the mark should be lowered so that they match in height. A good height would be approximately 3 1/2 feet from the ground. 

  5. Back your car approximately 25-feet away from the garage door and turn off the headlights.

  6. Remove the trim ring around the headlight and you will see two screws.

  7. Use a screwdriver to turn the screw at the top of the headlight in a clockwise direction to raise the headlight and in a counterclockwise direction to lower the light.

  8. Use a screwdriver on the screw located on the side of the light to move it to the left or right.

  9. Turn the headlights on to ensure they are adjusted properly, which be slightly below the taped center lines on the garage door.