Previous Article

How To Attach a Clasp to a Necklace

Next Article

How to Attach a Garage to Your House

How to Attach a Downspout Diverter to a Rain Barrel

Downspout diverters help keep water away from your home's siding and also help you to collect water in your rain barrel to use in the future. Using a rain barrel and downspout diverter will help you to save money by storing water that you can use to water your garden. It is fairly easy to make your own downspout diverter and attach it to your rain barrel.

You will need:


Supplies 



  • PVC pipe

  • PVC glue

  • PVC fitting

  • Screws

  • Water hose

  • Sandpaper

  • Barrel


 


Tools 



  • Drill

  • Screwdriver

  • Utility knife

  • Cutter

  • Shear-cutters

  • Work gloves


 



  1. You will need a long straight piece of PVC pipe and a shorter, angled piece. The angled pipe will attach to the water diverter and the longer piece will connect to the rain barrel. The length of the straight section of pipe will depend on how far away the rain barrel is. Both pieces of pipe should have a 3-inch diameter.

  2. Once you have cut the pipes so that they are the right size, sand the edges using sandpaper.

  3. Spread glue on the inside of both pipes and then press them together. Try not to touch the glue with your hands because it dries very quickly and is very hard to get off.

  4. Clean the water diverter and make sure that it is free of clogs and debris. Also check to make sure that it will fit into the pipe of the downspout diverter.

  5. If necessary, cut the water diverter so that it will fit inside of the downspout diverter. If the diverter came with a template, place it on the outside of the downspout diverter and secure it in place with sheet metal screws. If it did not come with a template, drill holes in the sides of the downspout diverter and then use sheet metal screws to hold it in place.

  6. Attach a section of water hose to the end of the downspout diverter and attach it to the rain barrel. You should be able to place the hose directly inside of the rain barrel. You can also make a hole at the top of the barrel, or in the lid of it, that is slightly larger than the hose and feed the hose through it.