Previous Article

How to Unclog Kitchen Sinks

Next Article

How to Build a Laundry Sink Cabinet

How to Attach a Laundry Sink to a Wall

Having a sink near your washing machine is all but necessary because of the convenience it provides. More and more homeowners are opting to purchase homes with this benefit or are adding this option themselves because of its low level of difficulty. If you have a small space, a wall mounted laundry sink will allow you the full benefit of your space.

What You'll Need:



  • Drill bit

  • Cordless drill

  • Leveler

  • Lag screws

  • Measuring tape



  1. Drill the plastic filler panel holes out on each side of the sink. These holes are located on the backside of the skirt of the sink. Inspect and use the correct drill bit size as indicated by the sink installation instructions that came along with your purchase.

  2. Insert the tab labeled "A" into the slot just underneath the rim of the sink. Slide the anchoring barb labeled "B" inside the hole that you previously drilled onto the skirt of the sink.

  3. Repeat the previous step for the opposite side of the sink.

  4. Use your measuring tape to measure up from the floor 33 1/8 inches. Make a note on the wall of this measurement. Begin fastening the mounting brackets onto this exact location. Use lag screws that are 1/4 inch in size to mount the brackets to the wall studs or wood blocking.

  5. Raise your laundry sink up and carefully lower it down on top of the mounting bracket. Inspect the area underneath the sink to ensure that each of the slots on the back of the sink fits correctly and securely over the top of the lip of the mounting bracket.