Previous Article

The Best Flower Girl Dresses

Next Article

How to Buy a Cheap Formal Dress

How to Bead a Formal Dress

Beading is an art form and growing in popularity. If you have artistic talents, you can bead anything, even a formal dress. All you need is to spend time planning your design and to execute some meticulous needlework. It is moderately challenging, but don’t be intimidated.


  1. Design your pattern. Sketch it out in advance.

  2. Check your dress. You want to look for linings or special corsets that could impede your bead design. Check the bottom hem for a separate lining. If there is a lining separate from your shell fabric, turn your dress inside out. You can sew through just one layer instead of two if you can access a separate lining.

  3. Freehand your design onto your dress. Measure the width and length of your design and compare it to your sketch. Make any adjustments needed.

  4. Use the correct needle for the fabric. Sewing onto silk, for example, requires  a smaller, finer needle than if you were attaching the beads to tulle. If you are unsure, test sew a bead onto an hidden area to check the material and bead work together. High count embroideries can be easily damaged by needles.

  5. Select beads that complement your dress and design, certain bead types work better with certain fabrics. Decide the placement of each bead; they can be contrasting or matching.

  6. Select the thread. Nylon beading thread is pre-waxed for easy use and twisted for strength.  For pearl or stone beads, use silk thread.  The thread you choose should work with your bead type and looping hole.

  7. Thread your needle and sew through the back of your dress fabric, knotting your thread twice. Your initial knot needs to be secure. Apply the beads individually, or in a running stitch. Beads applied in a running stitch can become weak after a period of time and once a single bead comes off, more follow.  Individual knotwork is more time consuming, but worth the effort.

  8. Thread the bead and insert your needle towards the direction of your next bead placement. To ensure your thread disappears against the fabric, it works best to thread and apply your beads in the same direction.

  9. Loop each bead twice. Knot your thread on the inside of the fabric and cut any loose ends. Repeat the process until your design is finished.