Previous Article

How to Buy Speakers for Infiniti Cars

Next Article

How to Buy a Used Acura

How to Break in a New Acura TSX

Depending on both the make and model of your vehicle, the break-in recommendations will vary. Specifically, for owners of a new Acura TSX, the manufacture recommends adhering to an easy to follow break-in procedure within the first 600 miles of driving the vehicle.

What You'll Need:



  • Manufacture vehicle manual



  1. To begin, slowly press the gas pedal on your new Acura TSX. Do so to slowly accelerate the vehicle. According to the manufacture's vehicle manual, owners should avoid "full throttle starts". A full throttle starts occur when you fully depress the gas pedal to the floor just after a stop. Routinely doing so will put an avoidable amount of extra strain on the engine of the vehicle.

  2. Ensure that you always attempt to brake both gently and slowly. Always try to avoid stepping on the gas pedal too quickly. Just as the previous example, doing so will put an unnecessary amount of extra strain on the engine of vehicle. Additionally, doing so will put additional amount strain on the new brakes of your vehicle and cause your engine to slow down too fast. Which over time could cause the engine to wear down faster than it normally would.

  3. Don't change the oil of your new Acura TSX too quick. Adhere to the specified guidelines of the first scheduled maintenance interval per the manufacture vehicle manual. Keep in mind, the amount of time or mileage indicated will vary depending on the climate and driving conditions of the location where you drive your vehicle.