Previous Article

How to Build a White Wall Shelf With Hooks

Next Article

How to Build Cheap Shelves

How to Build CD Shelves

Building your own CD shelves is a relatively easy and inexpensive project most people can complete in an afternoon. WIth a few basic tools, almost anyone can create a sturdy and functional shelving system that can store numerous CDs at once.


 

Supplies:



  1. 1/6-inch-thick wood

  2. Saw

  3. Hammer 

  4. Nails

  5. Sandpaper

  6. Measuring tape

  7. Pencil

  8. Wood glue


 



  1. Figure out the necessary dimensions of your new shelf. Look at the amount of space you have available and how many CDS you plan to hold. Record these measurements for your shelf.

  2. Since CDs are so light, only 1/6-inch thick wood is needed, but 1/4-inch wood can be used, as well. Take a piece wood and measure out the desired length. Cut the wood and sand the edges and corners. This is the base of your shelf.

  3. Take two more pieces of wood and measure out the shelf's potential height. Mark each piece of wood to have two identical pieces. Cut the wood and sand the edges. These are now the end pieces of your shelf.

  4. Connect one long piece to the base of the shelf, creating an L-shape. Hold in place with wood glue and then hammer nails in every four inches along the seam of the new corner.

  5. Do the same with the other end piece, on the other side of the base.

  6. Start measuring from the base of the shelf upward, making a mark in the wood every 5 1/2 inches with a pencil. This should be enough space for CDs to fit.

  7. Using the first dimensions you used to create the base of the shelf, cut additional pieces of wood. These will be the shelves. Cut as many shelves as you have room for after making your marks along the long pieces of the shelf.

  8. Align each shelf with the marks. Have a partner hold these in place as you glue and hammer the shelves into place. 

  9. Once finished, wipe the shelf clean and begin storing your CDs.