How to Build a White Wall Shelf With Hooks
A white wall shelf with hooks is a very nice looking shelf. You can use it to hang at your front door for hanging coats on or perhaps in the bathrooms for towels and clothing. They add an elegant touch to any area. The white color will add a warm positive feeling and look clean and neat. They aren’t that expensive but you can actually make one yourself.
Items you will require:
- White paint and paintbrush
- Level
- Stud finder
- Measuring tape
- Pencil
- Screw hooks
- Wood putty
- 5/8-inch wood screws
- Three-inch drywall screws
- Two decorative brackets with 10-inch arms
- One 40-inch board one-by-12 inches
- One 36-inch board one-by-two inches
- Two 6-inch boards one-by-two inches
- Paint the shelving and the brackets and the hooks prior to assembly. It will be a lot easier than doing it on the wall.
- Use the tape measure and come down from the ceiling to where you would like the shelf to be and mark it with a pencil. Do this in at least two places on the wall.
- Use the stud finder and locate three wall studs to mount the shelf assemble to for stability to keep it secure.
- Draw a line on the wall using the level and mark where the shelving will be when done.
- Put the two 6-inch boards on the line and secure them with three-inch drywall screws. They should be just inside the two outside studs in the wall.
- Place the two brackets perpendicular to the 6-inch boards and just inside of them. Mount them into the wall studs with the three-inch drywall screws.
- Drill pilot holes into the 36-inch board slightly smaller in diameter than the hooks you will be using. Try to space them evenly and be sure to leave 2-inches on each end. Now screw in your hooks.
- Put the two brackets up now by mounting them to the two 6-inch boards at the top and the 36-inch board holding the hooks. Make sure you keep the tops of the brackets even with the top of the 6-inch boards to keep them level.