How to Build a Water Well Cover
There are many types of water wells the most common being a well with its pumping components above ground for easy service. Depending on where you live you should protect the equipment and the well from weather and animals. It also keeps children away from the dangers of falling into the well.
- Take measurements of the well and plan on building your cover to have about a one-foot overlay outside the entire perimeter of the well area.
- Make the height of the pumping equipment your minimum wall size, as you will need to build a wall at least that high but not much more than that. You want to be able to lift the well cover to get at the plumbing and pumping equipment for repairs and replacements.
- Make this wall as elaborate or as simple as you want it to be. If your weather is extremely harsh you may want to go to insulating and heating the cover. If not, it can be as “bare bones” as you want to make it. You can use brick, stone, wood or whatever, as it makes absolutely no difference. If you are going to insulate it you will want it to be fairly weather tight.
- There is no need for a foundation, as it won’t need supporting. The actual weight will depend on what you use for the walls and roof.
- The actual roof also does not need to be elaborate. As long as you have some slope to prevent it from holding water you will be just fine. Remember that this is primarily a “cover” for your well.
- If you wish to anchor the well cover you can use posthole diggers and put in four by fours posts to secure it from wind damage. Remember that you do not want the cover to become a problem to remove if you have to work on the well or the pumping equipment.