How to Troubleshoot Hot Water Heater Problems
If your hot water heater has stopped heating water properly, then you could be facing a large repair bill. However, many of the causes of a malfunctioning water heater can be corrected without calling a professional plumber. Follow these tips to troubleshoot your hot water heater.
- Check to make sure all valves are open and clear of debris. If you have recently had work done to your water heater, then it is possible that a valve has been left off. It is also possible that a valve may be clogged by debris or dirt. If the valves are in the correct position, then you should gently tap the side of the pipe leading to the water heater. This may free any debris that has become trapped.
- Check the fuse box. Hot water heaters use a large amount of electricity. As a result, it is possible for it to trip the circuit breakers in your house. Open your fuse box, and check the guide to determine if the breakers are in the correct position.
- Check the thermostat. New hot water heaters may have their thermostat set too low for your tastes. There will be a compartment on the side of the water heater. Open it and check the temperature of the thermostat. Generally, a temperature between 120 to 130 degrees will suffice for a family of four.
- Check around your home for a water leak. If the water is leaking anywhere in the home, then it will cause the water heater to perpetually be low on hot water. Check under every sink, bath, toilet and shower in your home. If a major leak is discovered, then contact your local plumbing professional.