How to Build Homemade Garage Cabinets
To add organization, neatness and a more aesthetically pleasing garage space, consider building your own garage wall cabinets. Though building your own cabinets may seem like an undertaking, it's a lot easier than you think and will even save you money in the long run.
What You'll Need:
- Measuring tape
- Pencil
- Straight edge
- Circular saw
- Glue
- Power drill
- 1 1/2 inch grabber screws
- You'll first need to determine what size you'll need your wall cabinets to be. If you are going to install them on the entire wall, use measuring tape to measure the area. Take those measurements and divide the length of the wall by the total number of cabinets you'll want. This will tell you the width of the cabinets. Then, determine how tall you'll want the cabinets to be.
- Typically, wall cabinets are around 12 inches deep. Use this information and your previous measurements to create a parts and materials list. Take your measurements into account to make a list specific to the size and quantity of your cabinets.
- Once you have purchased all the items on your list, begin cutting each piece of your plywood with a circular saw. Label where you will install each piece at this point to avoid any confusion later.
- Butt joint each cabinet side onto the top and bottom to begin assembling the cabinet; add a small drop of glue on each joint. Connect the two parts together using a power drill and 1 1/2 inch grabber screws. Position the other side of the cabinet and connect it in the same manner as previously.
- Place small drops of glue all around the area where the back of the cabinet will be attached. Then use a power drill and 1 1/2 inch grabber screws to connect it.
- Mount the two hinges on the doors using a power drill.
- Position the cabinet on its back on a level surface and align the doors onto the cabinet. Connect the hinges with a power drill.