Previous Article

How to Build Simple Corner Bookshelves

Next Article

How to Build Wall Mounted Shelves

How to Build Storage Cube Shelves

Storage cube shelves are an excellent way to maximize storage space. They can easily be stacked on top of one another to form a shelf unit or you can create a storage area leaving room for a television in between the shelves to create the look of a home entertainment center. Whatever design you decide on, the basic concept is the same.

What You'll Need:



  • (2) Pieces 12 by 48 by 3/4-inch medium density fiberboard

  • Measuring tape

  • Pencil

  • Variable-speed drill

  • 1/8-inch drill bit

  • Countersink drill bit

  • (5) Pieces 12 by 12 by 3/4-inch medium density fiberboard

  • 2-inch drywall screws

  • Phillips-head screw tip

  • Framing square

  • Wood putty

  • Paintbrush



  1. Put the two pieces of 12 by 48 by 3/4-inch medium density fiberboard on a worktable or other flat surface. Using measuring tape and a pencil, measure from one end and create marks at 12, 24 and 36 inches.

  2.  Use measuring tape to measure and create marks at 3/8-inch in both directions from the previous marks you made. These marks will indicate the exact placement of the dividers. Put the framing square on the marks and make a line across the 12-inch depth of both medium density fiberboard pieces.

  3. Use a drill to drill three pilot holes between the lines. Make one at 1-inch from each edge and one that is about halfway with the 1/8-inch drill bit. Drill countersink holes above the pilot holes using a countersink drill bit. Ensure that you drill the countersink holes deep enough to hide the screw heads. Leave the hole visible or you can fill it with wood putty before you paint the storage cube.

  4. Put the 12 by 12 by 3/4-inch piece of medium density fiberboard on a working table or other flat surface. This will serve as the dividers creating cubed sections in the overall storage cube. Apply glue between each of the lines drawn in Step 2 on one of the long pieces. Place it on its long edge and secure the dividers to it with the 2-inch drywall screws. You can use a Phillips-head screw tip to complete this step. Clean up any excess glue immediately using a damp cloth.

  5. Apply paint in thin coats using a paintbrush to finish the storage cube shelves.