How to Build Wall Mounted Shelves
Wall mounted shelves are a neat and organized way to store and display books or other nick-knacks. Wood is by far the most creative material option to use because of the variety of styles available to choose from. Building your own set of shelves is easy, even for the most novice do-it-yourselfers.
What You'll Need:
- Wood shelves
- Primer and paint
- Stain
- Polyurethane
- Measuring tape
- Pencil
- Power saw
- Light sandpaper
- Spirit level
- Stud finder
- Screw gun
- 2-inch wood screws
- 1/2-inch wood screws
- Cut each shelf to your desired length using a power saw. Use a light sandpaper to remove any splinters. Ensure that you sand with the grain and not against it. Once the surface is smooth, you can either apply primer before painting or use a clear stain to allow the natural grain of the wood to shine through.
- Use polyurethane once you've stained the wood to protect it from any damage.
- Mark the spot on the wall where you plan to install the wood shelves. Next, on each mark position a spirit level against the wall and take a pencil along the edge of the level. If there is more than one shelf that you need to put up, you will already have pencil lines on your wall to assist you.
- Run a stud finder along each of the lines and make a mark at the point of each of the studs. Determine if you will install brackets only at the studs closet to the ends of each of the shelves or also one or more in the middle wall studs. This will be determined by the weight of what you plan to store on the shelves.
- Screw the brackets into the wall over each of the stud markings. Ensure that the top of the bracket is flush with each parallel line. Use an eraser to remove each of the pencil marks. Install the shelves onto the brackets and screw the brackets onto the shelves using 1/2-inch wood screws.