How to Build Your Own Smoker BBQ Grill
There is nothing like the taste of your favorite meats that are cooked in a smoker BBQ grill! The smoky flavor of slow-cooked meats is the taste of the warm season. Buying one can set you back well over $100, but you don't have to buy one to enjoy your own succulent, savory cooked meats.
- Get a hold of a relatively clean 50-gallon barrel that did not contain chemicals, a metal grill piece to fit the drum length and width-wise, 2-inch diameter pipe, some heavy duty hinges, a metal handle, channel steel tubing for legs and a metal box that will serve as your firebox.
- Measure and mark the midway point around the middle of the barrel lengthwise.
- Cut the barrel in half with an oxygen and acetylene torch. It'll look like a long clamshell.
- Turn the bottom half upside down and weld legs on it with the channel steel. Turn it right side up.
- Cut the metal grill to fit just inside the bottom half of the drum and weld in some metal tabs inside to support the grill but to also allow you to remove it.
- Cut a trap door in the bottom, put hinges on one side and a clasp to keep it closed on the other side. This is to remove ashes for cleaning.
- Place the top on, check for fit and weld the hinges and handle in place.
- Cut a small hole on the far right side of the top and weld four inches of pipe on for a vent.
- Cut another hole on the left side near the bottom half of the barrel and weld a foot-long piece of pipe.
- Attach the other end of the pipe to a hole in the top right side of your firebox. You'll need some sort of legs or stand for your firebox to sit on, are you can weld legs on it to the appropriate height.