How to Make a Keg Barbecue
A keg barbecue combines two good things: excellent barbecue and recycling. A keg barbecue will not rust, and can easily be used for grilling, with a cover. It provides a rustic look to your backyard, and can easily be the topic of conversation at your next outing.
Directions:
- Locate the centers of the top, bottom and each side of your keg. Use chalk to mark a line along the center of the sides. A chalk line can be placed along the distance and snapped back, creating a clear line that you will use to cut with in a moment.
- Cut the keg in half, along the length of the keg, as you measured it with the chalk. This should be done with a metal cutting blade. Take your time so that you will make a straight, clean cut with your power saw.
- After you have cut through the keg, place the sections back in place to make sure that your cut has been clean and they still fit together. If there is a problem with the cut, that the sections do not fit together, use your hammer to make adjustments to the cut so they will.
- From the sections, choose which of the halves will be the top and the bottom. On the back of the sections, take a measurement for hinges, which will affix to the back. Make a mark for the hinges that are three inches from the middle of the back. This will allow the top of the keg barbecue to open properly. Use your power drill to make holes for the bolts, then attach the hinges.
- Take a measurement so that you will be able to place the handle for the grill on the front of it. It is best to place the handle two inches above the edge. Use your power drill again to drill the holes for the handle, then screw it in.
- Measure space for the grill, then purchase the grill to insert into your keg.
- Create the stand for the barbecue. You can use an old TV tray's legs for this purpose. Make sure to position the keg on your stand in a way that the top opens without a problem. You will then fill the bottom of the keg with charcoal. Once lit, you are ready to barbecue.