Previous Article

About Barbeque Grills

Next Article

How to Make a Keg Barbecue

How to Build a Backyard Barbecue Island

Who can resist the taste of food cooked on the outdoor grill? A backyard barbecue island is a great way for barbecue enthusiasts to cook their favorite meats and vegetables, while enjoying the beautiful outdoors. Building a backyard barbecue island can take some time, however with a few simple tools and supplies, your friends will be inviting themselves over to taste your creations.

Supplies Needed:



  • Stones or bricks

  • Ceramic porcelain tiles

  • Tape measure

  • Level

  • Mortar

  • Trowel

  • Shovel

  • Concrete blocks

  • Sand

  • Cooking grate

  • Burners



  1. Choose a location to install your barbecue island. Typically these are installed in locations away from the home to ensure a safety distance for fire safety. Some cities my have special building permits to build these units. Check with your local fire department to confirm if a permit is needed.

  2. Find a layout or plan to go build your unit. Many sites online offer free plans to build backyard barbecues. These step-by-step instructions will give you a general idea of how most backyard barbecues are built, however you can customize your unit to fit your needs. Another place you can find plans is at the local library. In the 1950's to the 1970's many books were published on how to design and layout backyard grills and barbecues.

  3. Begin by digging a 10" trench that will fit the dimensions of your unit to be able to lay the concrete blocks in to build the base.

  4. Place your concrete blocks around your base. Use your level to make sure the blocks are completely level before proceeding to the next step. It may be necessary to add sand or dirt to properly level the blocks.

  5. On the inside of your concrete blocks, you will place you bricks. Again, making sure your bricks are completely level.

  6. Determine your height. Most typically the height of your bricks and concrete will be 40" or slightly more depending on your height. Find a comfortable cooking height to build your base up to.

  7. Once your height is determined, use your mortar mix and trowel to set your base in place by filling in cracks in the inside and outside on the base of your unit.

  8. When the mortar has dried, add your grates and burners to the top of the unit. These are installed by following the manufacturer's instruction guide.