How to Build a Brick Barbecue Smoker
Having a backyard barbeque is the American pastime. What better way to treat your guests than to smoke your meat in your own home made backyard barbeque/smoker? The smells coming from your pit will definitely be a conversation piece as people envy your creativeness. With a little planning your vision can become a reality.
Things you’ll need:
- Stakes
- Metal lintel
- Screen
- Sheet of plywood (32-by-32 inches)
- 42 Cinder blocks (eight-by-8-by-16)
- Shovel
- Use the cinder blocks to create your base rows for your smoker. Place two rows parallel to each other and use one cinder block placed perpendicular to the two rows as the back. Leave the front of the pit open for the smoke to funnel through.
- Rest a metal lintel across the front sidewalls. This will support the weight of the succeeding rows. Using a stagger pattern, place five rows of bricks on the front, back and side rows. This creates the smoker for your fire pit. There is no need to use mortar or cement as you will want the bricks easily moveable later on.
- Cut your piece of plywood to measure 32-by-32 inches. This will become the cover for the smoker side of your pit.
- Extend from the bottom parallel rows of your smoker and place two more bricks end to end. Then place three bricks perpendicular onto the extension so that the smoke funnels into the smoker side once there is a fire.
- Push in the bricks on opposing parallel rows to create a ledge for screens to be placed. Place the screens inside the smoker for your meat to sit.
- Place your plywood you cut earlier on the top of your smoker as the finishing touch.