Previous Article

How to Build a Brick Patio Fireplace

Next Article

How to Clean a Red Brick Patio

How to Build a Brick Patio Space

Creating a brick patio space is a great design idea for an outdoor landscape. Bricks can be laid in various ways to create a unique pattern for the patio. Depending on the size of the patio space being built, a building permit may be required.

Things you will need:



  • Brick pavers

  • Landscape fabric

  • Landscape spikes

  • Stone dust

  • Sod lifter

  • Plate compactor

  • Rake or Shovel

  • Push brooms


 



  1. Contact the local building department. Before digging, have an inspector come out and locate any underground hazards.

  2. Choose the area to build the patio. Once that has been done, design a sketch of the patio including the pattern that will be used.

  3. Remove the unwanted grass for the designated patio space. Rent a sod lifter from a local home improvement store. Make sure to dig about 3 inches deep into the ground in order to get all the roots out. 

  4. Level out the remaining dirt. Use a shovel or rake to smooth out any humps in the dirt as a result of the digging.

  5. Apply the lawn fabric. Use the spikes to secure it to the ground. 

  6. Cover the fabric with stone dust. Use a ton of stone for every 100 square feet of space.

  7. Lay the pavers down. Once all pavers have been laid, use a plate compactor to  settle them into the stone dust.

  8. Apply additional stone dust. Make sure that all cracks and crevices are filled completely and use a push broom to settle the dust in. Finally, use a garden hose to wash off any residual dust.