How to Build a Charcoal Barbecue
Portable barbecue grills are a great addition to outdoor cooking events such as picnics and camping trips. The grills do not have to be store bought. You can make you own grill easily and save on the cost of purchase. Some of the items that make excellent materials for grills include Metal drums and empty beer kegs.
Items:
- Empty Beer Keg or a Metal Drum
- A Grate
- Bolt Cutters
- Metal Cutting Saw
- A Metal File
- Hinges
- Nuts and Bolts
- Two Bar Stocks
- Paint
- Metal and Wood Handle
- Starter Fluid
- Vegetable Oil Spray
Instructions:
- Cut the keg or metal drum into two lengthwise using the saw. Draw a line around the center of the keg to make the cutting easier. You may need to switch to new blades often as the cutting blunts the saw.
- Mark locations for the holes that you will drill for the hinges. Ensure the locations you mark on the back of the grill are centered so that the top and bottom halves of the grill are aligned.
- Drill holes on the marked locations and attach the hinges. Use the nuts and bolts to fasten the hinges. Position the handle on the top of the grill and fasten it with nuts and bolts.
- Build a base for the grill using two slotted bar stocks on the bottom. Place them along the long side of the grill so they run perpendicular to each other. Fasten those using nuts and bolts. The bar stocks serve to stabilize the grill so it does not roll away.
- Cut the grilling grate or mesh using bolt cutters, to a size that will allow it to fit inside the bottom half of the grill. Leave two-thirds of the space in the bottom for the charcoal.
- Clean the grill using warm water and soap. After it dries, paint the grill using high temperature paint.
- Spray the grate with vegetable oil spray before using. This will help to create a non-stick surface.