How to Build a Dance Dance Revolution Game Pad
Dance Dance Revolution, or DDR, is a game that is available to almost every type of game console. DDR has the player jumping up and down and dancing on a game pad to match the colors of the arrows on the screen. Metal dance pads are extremely expensive and can break easily. You can make your own that will be more durable and very cheap.
Materials needed:
- Plywood sheet
- Metal fiberboard
- Peg board screws
- Corner braces
- Wood glue
- Game controller
- Soldering gun
- Plastic or Lucite
- Get one piece of pegboard in the dimensions that you want your dance pad to be. This will be used as the base of the dance pad.
- Cut out many different squares of plywood and sheet metal. Make each of the squares about one foot long on each side. Cut as many squares as you need to fit your desired size.
- Put the squares on the plywood. Attach the squares using screws. Connect strips of fiberboard to the bottom with wood glue.
- Connect the squares together in an alternating pattern using corner braces. You need to have a three by three "x" shape when you are done.
- Take out the cables inside of a game controller. Solder the wires to the bottom of the sheet metal squares. Have enough of the cable hanging out so you can connect the controller to the game console.
- Screw the squares on the base pegboard. Affix an equal length of Lucite or plastic, whichever you choose, into the four spots.
- Connect the dance pad to the game console. You can now play Dance Dance Revolution.