How to Build a Fishing Boat

If you enjoy fishing and are very good at using your hands you may want to build your own fishing boat. To build a fishing boat it requires that you have skills in carpentry, welding, and concrete work. Building a boat can be challenging but in the end it will be worth the hard work.

Things you will need:

• 6mm reinforcing rod


• 16mm reinforcing rod


• Welding machine


• Wire tying tool


• 16 gauge wire ties


• 13 x 13 x 19 gauge wire mesh


• Cement


• Plaster sand


• 1 x 10 planking for seating and decking


• Cement mixer


• Wood sealant


• Circular saw


• Concrete nails


• Marine plywood


• Angle brackets


• Hammer


• Nails


• Silicone sealant

1. Take your 6mm reinforcing rod and you will need to start bending it to form the frame for the fishing boat. 


2. Space the frames evenly. 


3. Using the welder you will need to tack the keel to the frame.


4. Tie the sheer bars using the 16 gauge wire ties. This will keep the keel in place.


5. Add stringers to the sides and bottom using the 16 gauge ties.


6. Get the 13 x 13 x 19 gauge wire mesh and put it over the stringers from the inside and outside of the hull. Tie the stringers, flooring stringers, ribs and bow to the mesh where it crosses the support using the 16 gauge ties.


7. Tie together every six inches the inside and the outside mesh.


8. Get your plaster sand and you will need to mix that and the cement and water together. Make sure it is completely mixed before applying it to your boat.


9. Apply the mixture first to the inside of the boat.


10. Let the mixture dry completely.


11. Apply the mixture to the outside of boat.


12. Let the mixture dry completely.


13. Allow the cement mixture to sit for at least 30 days before you finish the boat.


14. Fill the hull with some water to check and see if the boat has any leaks after the 30 days have passed.


15. Get the wood sealant and you will want to apply it to the 1 x 10 planking for seating and decking.


16. Let the wood sealant dry completely.


17. Add the seating and the decking to the boat as your prefer. 


18. Create a box to contain the fish. Cut the plywood using the saw and attach the box together with the hammer and nails.


19. Use silicone sealant to seal the seams of the fishing box.