How to Build a Log Rack From Wood
If you use firewood during the winter season, the wood must be stored properly and provide air circulation to prevent rotting. The best solution to this problem is construction of a log rack. Anyone with basic carpentry skills and the proper tools can construct might be able to build one. The rack can generally be done in less than a day. Here's how to do it:
Supplies
- 2 x 4's 8 feet long (8)
- Three inch deck screw (8)
- Tape measure
- Power drill
- 1/2 bit
- Saw
- Hammer
- Nails
- Lay out two 2 x 4s parallel to each other on the ground. They should be about one foot apart since most logs are generally cut about 16 inches in length. These will be the rack's bottom runners.
- Measure 12 inches on four of the remaining 2 x 4s and mark the position on each piece.
- Drill two holes adjacent to each other at the marked spot on the four pieces.
- Now, it's time to attach your bottom runners. Select a piece with the newly drilled holes. Align the end of one runner piece with the holes. Attach the pieces together by inserting two of three inch deck screws through the holes and into both pieces. Repeat this process with the remaining pieces of lumber. In the following steps, you will put the rack together.
- Stand both sections of your frame up 12 inches apart. When in the proper position, each piece will resemble an "H" with squatted legs.
- Mark the remaining 2 x 4s into 12 inch sections and cut with your saw. When finished you should have 16 one foot sections.
- Nail six of the 12 inch cross members along each side of the two frames joining them together. Each side will resemble a ladder when complete.
- Use the remaining four pieces of 2 x 4 to add a triangle brace to each corner leg to the bottom runner. Nail one end of the brace to the leg and the other end to the bottom runner. This will add stability to the rack.