Previous Article

How to Build a Log Rack From Wood

Next Article

How To Build a Makeup Artist Portfolio

How to Build a Lumber Rack for a Truck

One of the most hazardous jobs is hauling lumber in a truck. Oversized loads can stick out of the truck's bed. Building a lumber rack for a truck can easily address this problem. This article will instruct you on how to build a lumber track for a truck.

How To Build A Lumber Rack For A Truck




  1. You will need 100 inches of measuring tap, PVC solvent, an emery cloth, PVC pipe, and PVC fittings. The PVC pipes should be Schedule 80 PVC in 2 1/2 inch and 2 inch in diameter. The PVC fittings should be a three-way elbow and T-connectors in 2 1/2 inches in diameter.


  2. Measure the length and width of the truck bed.


  3. Measure the distance inside the wheel wells.


  4. Cut out the frame into two pieces of 2 1/2 inches of PVC pipe. Place the pieces on the ground and connect the piece with 90-degree PVC elbow connectors. Do not glue them. Add a support every 26 inches. Cut the frame into segments and then add a three way T-connector at any break.


  5. The top of the frame should be cut into pieces of 2 1/2 inch of the PVC pipe. Place the pieces on the ground. Cut and fit the supports in the same manner as the bottom part of the frame.


  6. Cut pieces of the PVC pipes into 2 1/2 inches. The pieces will fit into the top and bottom frame to create a box frame.


  7. Measure and cut two 2 inch PVC pipes. Fit these pieces together. These 2 pieces should run through the straight T-fittings at the elbow of the frame. Cut 2-inch pipes to fit into the 2 1/2 inch uprights also.


  8. Glue all of the pieces together.


  9. Slide the frame into the truck and secure it with tie-down straps.