Previous Article

History of the Massage Chair

Next Article

How to Buy a Massage Chair Online

How to Build a Massage Chair

Many people are having stressful times during the current economic crisis. You can enjoy your own massage chair in the comfort of your home when you build a massage chair. A daily massages helps reduce your level of stress. The best alternative you have besides using a professional masseuse or buying a massage chair is building your own message chair. You can use tennis balls, golf balls and creativity to build a massage chair.


  1. Take a dining chair frame and then measure the width and length of the seat. In addition, measure the back support. You are measuring the chair frame to decide how big the pieces of plywood should be. Cut the plywood with a saw. Cut four pieces of plywood. Two parts are for the seat's support frame and the other two parts are for the back support.

  2. Estimate how many tennis balls can fit on your seat. You need about five rows of tennis balls. See how many tennis balls you can place on the plywood you cut to determine how many balls you need for the seat and back support of your massage chair. 

  3. Grab a tennis ball and then trace the columns and rows. Trace the tennis ball on first two parts of plywood, such as the seat plywood and on back plywood. Grab a jigsaw and then cut the traced circles out. 

  4. Take a golf ball and then trace small circles on the remaining pieces of plywood. The plywood that is remaining will be for the back piece of the massage chair that you traced with your tennis ball. Cut the golf circles you traced with your jigsaw. You are cutting the smaller holes in so the balls can roll into the holes. In addition, the tennis balls will not go through the larger holes.

  5. Take the plywood with the large holes and line it up with the back support of your chair frame. You are going to determine where to drill holes in the chair frame, so you can attach the plywood by using the existing holes in your chair frame. Mark the spots on the plywood with a marker that corresponds with the holes on your chair frame. Drill holes into the spots you marked that can fit bolts. Repeat this process with the plywood that has smaller holes.