How to Calculate Roofing Materials
There are many angles on roofs, especially multi-tiered roofs, so when it's time to shingle your home, how are you to know how much material you should order? Thankfully, this problem is solved with a standardized system that sells roofing materials in measurements called squares (One square = 100 square feet). Once you know how many squares you need, ordering materials is much easier.
Things You'll Need
- Ladder
- Tape measure
- Pen & Paper
- Calculator
- Use your ladder to climb onto your roof. If available, have someone with you to steady the ladder as you climb.
- Measure from the top of the main part of the roof to the eaves. Write this down.
- Measure the length of the roof, from end to end, and write this down as well.
- Multiply these two values together to get the square footage. For example, if your roof section is 30 feet high and 50 feet long, 30x50=1500 square feet.
- Repeat this process for each section. If there is an area that isn't square or rectangular, use the longest span to calculate with. It's better to have too many materials than not enough.
- Once you have done this for all the roof sections, and added all your square footage together, add 10 percent. For example, if your total combined square footage is 3,000 square feet, your working number will be 3,000+300=3,300 feet.
- Divide the working number by 100. This gives you the number of roofing squares you need. In this case, you would order 33 squares.
- Use the same figure of roofing squares to order your felt underlayment. For roofing nails, multiply the number of roofing squares by 350, as you generally use 350 nails for each roofing square. In this case, you would order 33x350 =11,550 nails.