How to Care for Your Aluminum Fishing Boat

If you care for an aluminum fishing boat, prevent algae growth by removing the boat from water when it is not in use.  Also, clean your boat with soap and a scrub brush, and apply an aluminum polish once a year.  Inspect your boat often as well, to make sure it is in good condition and without leaks.

• Remove your aluminum boat from the water when it is not in use.  This keeps algae off your boat and reduces the risk of damage like corrosion and rusting.  If your boat is kept in the water remove it at least once a week to dry it out.


• Wash your boat often to remove dirt and debris.  Take your boat out of the water and place it on flat ground.  Remove the plug from the bottom of the boat and use a hose to spray it down.  Use soap and a scrub brush to remove dirt.  Pay close attention to the bottom of the boat removing algae growth.  Leave your boat to fully dry and place the plug back into the boat.


• Use aluminum polish on your boat at least once a year.  Purchase this from your local hardware store.  Apply polish to the inside and outside of your boat.  This keeps your boat in good condition and helps protect it from rust and water damage.


• Inspect your boat often looking for areas of damage.  Make sure the plug is in working condition and placed securely in the bottom of the boat.  Look for rust damage and aluminum wear.  Also, check all boat rivets to make sure they are securely placed.  Replace any rivets that are damaged or missing.  This is important so water does not leak into your boat.