How to Change a Fog Light Bulb on the 2004 Subaru Forrester
As with almost all safety devices on automobiles fog lights are not there for just the looks of the car. When there are foggy conditions and visibility is highly restricted fog lamps greatly increase your field of vision. When one goes out you should replace it immediately for you and your family’s safety. It is easy to do this yourself.
Items you will need:
- Phillips screwdriver
- Flat head screwdriver
- Latex gloves or a soft rag
- Use the flat head screwdriver to pry the pushpins loose that are holding the splash shield covering located in front of the assembly that holds the fog lamps.
- Press the retaining clip that holds in the wiring harness in a downward motion and pull the harness apart.
- Take out the mounting screws that are located on the front of the housing assembly with your Philips screwdriver. Separate the light assembly from the housing.
- Remove the bulb retaining housing by turning it counterclockwise and pulling it straight out of the assembly. Use the rag or latex gloves and remove the old burned out bulb. You should never touch new bulbs as the oils on your skin may make them burn out more quickly.
- Put the new bulb in the retainer and replace it by turning it clockwise back into the assembly.
- Place the assembly back into position and fasten it down with the mounting screws. Put the wiring harness back into position and snap them together again.
Use the retaining clips and replace the splash shield and make sure it is locked back in where it belongs securely.