Previous Article

How to Clean Battery Corrosion on Electronics

Next Article

How to Clean Bed Pillows

How to Clean Battery Terminals

When battery terminals are properly cared for, a vehicle will run smooth. You must clean the battery terminals to protect other parts of the engine. The sulfuric acid can leak onto other engine parts when the terminals are not cleaned. This article will instruct you on how to clean battery terminals.

How to Clean Battery Terminals




  1. Look for corrosion on the battery terminals. The corrosion on the terminals is sulfuric acid buildup, which is caused when the acid leaks from the battery.


  2. Using a clean and dry towel, wipe the battery terminals to remove any loose corrosion.


  3. Pour carbonated water onto the terminals to loosen the sulfuric acid corrosion.


  4. Allow the carbonated water to sit on the battery terminals for about 30 minutes to break up the corrosion.


  5. Use a wire brush to clean away the corrosion. Use a clean towel to wipe away the excess carbonated water.