How to Clean Brick Siding With Acid
Brick is beautiful and long lasting, but prone to staining over many years. The porous stone is affected by weather, the sun’s rays, water, dirt, mold and oil. Fortunately, with proper care and cleaning it is possible to restore the brick to its former glory.
Materials
- Muriatic acid cleaner
- Scrubbing brush
- Bucket
- Rubber gloves and protective eye wear
- Garden hose
- Cloth
Instructions
- Spray the brick siding with water using the garden hose. Ensure all the loose dirt comes out. Loose dirt makes the next steps a bit harder to perform.
- Cover all the exposed areas other than the brick siding with the cloth. This is to prevent the acid from damaging other objects.
- Wear the protective eyewear and gloves. You should also wear a long sleeved t-shirt to cover your arms.
- Pour water into the bucket and mix in the muriatic acid. Follow the instructions on the label to make sure the solution is effective. Most manufactures recommend using one part of acid with 10 parts of water.
- Apply the solution on the brick siding, making sure the parts that are stained are soaked thoroughly.
- Leave the solution on for 10 minutes to allow it to soak into the brick and loosen the dirt and stains.
- Scrub the siding using the stiff brush. Use additional solution to get rid of any stubborn stains and continue scrubbing until all the stains are gone.
- Rinse the brick siding with clean water to remove all traces of the acid cleaner solution. Make sure you hose down the siding with plenty of water. Any acid left on the brick can continue to corrode the siding.
- Clean the surrounding area to ensure no traces of acid remain then allow the brick siding to dry. Change the clothing you were wearing immediately you complete the task and make sure there are no acid residues on them.