Previous Article

How to Seal Sand for a Brick Patio

Next Article

How to Clean Brick Siding With Acid

How to Add Brick Siding

Adding brick siding to a building can help it withstand many different weather conditions. The building will also be better insulated and more durable. You can follow a series of steps that will help you to add brick siding to your home or building.


 

Things You’ll Need:



  • Several hundred bricks

  • Power washer

  • Crow bar

  • Water proof sealer

  • Bags of cement

  • Grout

  • Tape measure



  1. Remove any siding that is already on the building. Wood and aluminum siding can be easily removed with a crow bar.

  2. Use a power washer to remove any material that remains after you remove the previous siding.

  3. Apply a waterproof sealer to all sides of the building where the bricks will be installed. The sealer will prevent any water from leaking underneath the bricks and causing damage to the structure.

  4. Determine how many bricks are needed by measuring the wall surface of the building. You want to measure length, width and height.

  5. Mix several bags of cement with water and apply it to the surface of the buildings walls. You may want to do 8 feet at a time and continue once bricks are applied to that area.

  6. Apply the bricks to the wet concrete using a sideways or upward design. The design you choose depends on the look you are trying to create.

  7. Apply grout between the bricks so the under lying area is completely protected from outside weather conditions.

  8. Spread a waterproof sealer on the bricks as you apply them.

  9. Allow the bricks to dry for 72 hours before touching the bricks or working on the brick area.