Previous Article

How to Clean Wet Carpets

Next Article

How to Make Money Cleaning Carpets

How to Clean Wood Floors After Removing Carpets

After carpet is removed, the wood floors underneath can look horrible. You will find glue, staples and an accumulation of dust or dirt. The floors can be cleaned to turn them into a good condition or get them ready for other projects.

How to Clean Wood Floors After Removing Carpets


Materials Needed



  • Pry bar

  • Broom

  • Rubbing alcohol

  • Spray bottle

  • Clean cloths

  • Bucket

  • Murphy Oil Soap

  • Clean towels

  • Vinegar

  • Mop



  1. Use a pry bar to remove any staples from the floor. It will make cleaning the floor much easier.

  2. Sweep the floor with a broom to as much dirt and dust as possible.

  3. Pour rubbing alcohol in a spray bottle. Spray the floors to soak the adhesive. Soak a clean cloth with the alcohol and use it to wipe away the adhesive. Use circular motions. Go over the area with a dry cloth.

  4. Go over the area with a broom to remove any remaining pieces of adhesive.

  5. Fill a bucket with 1 gallon of warm water. Add Murphy Oil Soap to the bucket according to the directions on the bottle.

  6. Dip a mop in the solution and squeeze it out. Mop the floor in sections. Repeat this step until the entire floor is completed.

  7. Dry the floor with dry towels. Allow the floor to dry for several hours.

  8. Fill a spray bottle with one part vinegar and three parts water. Shake the bottle and spray it over the entire floor. This will help create a shine on the floor.

  9. Use a dry mop to buff the floor to a shine. Use circular motions and work on one section at a time. Allow the floor to completely dry.