How to Configure Wireless Printing
Wireless printing allows you the ability to print your documents quickly and easily from any location in your home or office. This type of printing also provides you with the convenience of not dealing with wires getting in your way and unhooking your laptop, so someone else can print a document from theirs.
- Unpack your wireless printer from the container and review all of the necessary information. You have to make sure that the printer has the necessary parts installed, such as the ink cartridges, and the power cords plugged into the correct sockets. Any other relevant parts of the printer are reviewed in the setup portion of the printer’s manual.
- Choose a location for your printer that is somewhat central to your home. Since this is a wireless connection, the location is important, so that the location on one side of your home works just as good as the opposite location.
- Enter the appropriate wireless network TCP/IP address into the wireless printer, to set up the connection. Each printer is different, so follow the directions in the manual. It may have you enter this information directly into the printer, or through a website that modifies your printer’s settings. Once your computer is connected, you can control the wireless network and any settings that need to be changed.
- Install the software onto every computer and laptop that will use this wireless device. Once you enter the installation CD, simply follow the prompts, until you have completed installation.
- Wire the printer to an old computer to act as a main console and set the other computers up to direct the printing commands to this device. By completing this step, you eliminate the need to purchase a separate wireless printing unit.