How to Connect Digital Cable Boxes
Digital cable boxes convert the signal that comes through the cable from a digital signal to an analog that can be recognized by your television set. There are several ways to accomplish this, but one of the best is to connect the digital cable box with a HDMI cable.
What You Need
- RCA cable
- Coaxial cable
- HDMI or component video cable
Instructions
- Find the cable connection that is coming through the wall and connect the cable box to it with a coaxial cable. Pick up the F-connector cable end and twist it onto the end of the cable jack that is coming into the house. The other end should be twisted onto the input cable at the back of the cable box.
- Find the red and white plug that is on the end of the RCA cable and plug it into the red and white audio input on your television. The other end should be plugged into the "audio out" found on the cable box.
- Connect the back of the cable box to the video cable. You can do this in two different ways. You can use a component video cable consisting of three cables. These have red, green and blue plugs on each end. On the back of your cable box you will find matching red, green and blue outputs. Match the output with the plugs. You can also use an HDMI cable to plug into the HDMI output on the box to accomplish this task.
- Take the other end of the video cables and connect to the television. The component video cable will have red, green and blue input plugs which can be matched up to the red, green and blue input at the television back. The HDMI cable just plugs into the HDMI input on the television.