Previous Article

How to Get Digital Cable TV on a Mac Notebook

Next Article

HD Cable Options

How to Troubleshoot Digital Cable TV Problems

Some homes utilize a digital cable connection source to obtain television programming. There may become a time when the quality of the cable drops or goes out completely. When or if this happens there are several ways you can troubleshoot the problem.


  • Examine the cables that are running into and out of the receiver. You will have bad video and/or audio if the cables are not properly connected to the receiver.

  • Press the volume control on your television to make sure you did not accidentally turn the volume down if you are having audio trouble.

  • Turn the power off to the digital receiver and allow it to remain off for a few minutes. Turn it back on and wait for it to fully load. This will normally correct the problem you are having.

  • Turn on the television and make sure it is set on "video" if you are using RCA cables connected to the digital receiver. It should be set on "component" if you are using component cables or "HDMI" if you are using a HDMI cable. If these are not set properly you will experience problems with your cable.

  • Examine the power outlet for the television to make sure it is plugged in. If you are using a surge protector strip make sure the light is "on." You may want to try plugging it into another outlet to see if that solves your problem because the outlet you are using may be faulty.

  • Call your cable provide if you continue to experience problems.