Previous Article

Battery Minder VS Battery Tender

Next Article

How to Install a Battery Tender

How to Connect a Battery Tender

A battery tender is a device that can be attached to a battery, plugged into an electric outlet and used to charge the battery. They are normally small and portable so that they may be kept in a car. It is extremely important to know how to connect a battery tender to a battery.


  1. Pop open the vehicle hood and prop it with the metal stick prop. Place the battery tender next to the car. You can place it on any flat surface that is within reach of the vehicle battery.

  2. Attach the positive battery tender clip to the positive battery post. The positive battery tender cord will be red. The positive battery post will be red and marked with a (+) sign.

  3. Attach the negative battery tender clip to the negative battery post. The negative battery tender cord will be black. The negative battery post will be black and marked with a (-) sign. If the vehicle has a positive ground, you can connect the negative battery tender clip to the chassis.

  4. Plug the battery tender into an electric outlet and choose the mode. If the battery is completely dead, choose the "100%" mode. If it just needs a little boost, choose the "Storage" mode. Push the "Power" button to start the battery tender.

  5. Allow time for the battery tender to charge to battery. Depending on how dead the battery is, it could take several minutes. Pay attention the display lights. When the lights turn green, it means the battery is fully charged. You can then unplug and disconnect it.