Previous Article

How to Convert a PDF to Microsoft Word

Next Article

How to Convert a Walk-In Freezer to a Refrigerator

How to Convert a Riding Mower into a Go-Kart

Owning a go-kart can provide hours of fun, but purchasing a professionally assembled unit can be expensive. However, for those with a bit of fabrication knowledge, a few tools, some extra metal, pieces of metal tubing and a riding lawn mower, a go-cart can easily be within reach. Here is how to get started and be on the track in no time.

Step One - Use an older riding lawn mower with a good working motor for the project. An older mower is the best option, because most were made from steel tubing, while many of the newer models are single pieces of steel, which can be difficult to take apart.



Step Two - Strip the lawn mower down to the frame by removing all the parts. Check the remaining frame for any cracks or metal fatigue. If needed, reinforce the frame on the bottom by welding on a few pieces of additional steel tubing. The frame must be stable for off-road activity.



Step Three - Install engine brackets on the frame where the engine was previously bolted. Mount the engine in the brackets and connect all components to it.



Step Four - Install all the electrical system components for the throttle.



Step Five - Assemble the rear wheel drive train by installing the sprockets, axles, wheels and tires. Remember, the constant vibration can cause the bolts to come loose if they are not properly tightened when the vehicle is in use. Mount the completed assembly to the frame.



Step Six - Purchase and install according to manufacturer instruction the steering system, brake system and throttle pedal kits. Installing kit components, for these major systems, is the best option if you do not have much experience in fabricating parts.



Step Seven - Finish up your rig by installing the seat and safety harness, and paint your go-kart the color of your choice.