Previous Article

How to Cook Steak and Vegetables on Gas Grill

Next Article

How to Cook With a Charcoal Barbecue

How to Cook Using a Gas BBQ

It's important to first note that cooking on a gas grill is not the same as cooking with wood or charcoal. There are specific safety precautions that you must adhere to both before and after cooking on a gas grill. In addition to the safety issues, gas grilling often has a variance in cook time as well.

What You'll Need:



  • Propane

  • Dish soap

  • Gas grill

  • Lava rocks



  1. Position the grill on a level surface. Any uneven area could cause the grill to roll or tip over.

  2. Next, add a layer of lava rocks on the bottom of the gas grill.

  3. Connect the propane tank and make sure that the connection from the propane tank and the hose is secure. This is the hose that will feed gas into the grill. If there are any leaks in the hose or connection it could pose a fire hazard.

  4. To test the propane connection, place soap bubbles on the spout of the propane tank. Open the valve to release the gas, any movement or lack of movement by the soap bubbles will allow you to see the status of the connection.

  5. Completely open the valve on the propane tank in order to release gas into the grilling chamber. Don’t allow the chamber to fill too much with propane, as this will also pose a fire hazard.

  6. Turn the lighter switch that is located on the gas grill. If your grill does not have a lighter switch, you’ll need to light a match and toss it into the grill from around 5- feet away. You can adjust the gas flow in the grilling chamber if you need to increase or decrease the flame inside.

  7. Put the food that you plan to grill on the grill racks. Just like with most other grills, you’ll need to monitor the food to ensure the desired cooking level is achieved.