Previous Article

How to Buy Carpet Tiles

Next Article

How to Fix Carpet Tiles.

How to Cut Carpet Tiles

All homes have high-traffic areas. They may also have pets or children. All these things can be tough on carpeting and cause wear and tear easily. Carpet tiles are the best way to install carpeting in the areas of high-traffic. It a fairly simple weekend do-it-yourself project. Use the right materials and follow the step-by-step directions to cutting carpet tile before installation.

MATERIALS NEEDED



  • Straight-edge utility knife

  • Work gloves

  • Measuring tape

  • China marker

  • Piece of cardboard


 


CUTTING THE TILES



  1. Gather all of the tools needed for the job to be done.

  2. Put work gloves on for safety. The gloves will keep the hands from getting blisters while working on the carpeting. They also protect the hands from cuts and bruises.

  3. Put a piece of cardboard down over the worktable where you will be cutting the carpet tiles.

  4. Go over the area where you need to place the tiles with a measuring tape to get the exact measurements for the area.

  5. Write the measurements down on a paper.

  6. Transfer the measurements the back of the carpet tiles also. This will assure that the carpet tiles will fit the area easily. Write the measurements using the china marker.

  7. Cut a little indent into either side of the edge of the tile to be cut. Carefully cut from one indentation straight across to the other indentation along the straight side edge of the tile. Press down firmly holding the tile in place while doing the cutting. Fold the piece back to separate the cut side. Do this same step for the other sides of the tiles until the piece is completely cut into the size needed.

  8. Repeat step seven until all of the pieces needed have been cut that will be placed on the floor.