How to Fix Carpet Tiles.
Carpet tiles are an easy way to install carpet because they can be easily fixed or replaced. The tiles are stiff-backed and the back has adhesive on it for quick and easy installation. If the carpet becomes worn or stained, simply fix the tiles by following the uncomplicated steps.
MATERIALS NEEDED
- Cleaning brush
- Vacuum
- Utility knife
- Pry bar
- Stain remover
- Carpet Shampoo
- Shop-vac
- Bucket
- Water
- Two cloths
CLEAN OR REMOVE STAINS
- Spray stains with carpet stain remover or carpet shampoo. Let the cleaner sit for a few minutes. Scrub the stains gently with a cleaning brush.
- Absorb the excess water from cleaning by using a shop-vac.
REPLACE DAMAGED TILES
- Detach the damaged carpet tile. Carefully cut the damaged tile with a utility knife and then pry it from the floor with a pry bar. Remove all other damaged tiles the same way.
- Vacuum the floor underneath where the carpet was removed with a regular vacuum cleaner. Wipe the floor with a wet cloth to remove any left over adhesive on the floor. Dry off fully with a cloth.
- Take off the paper backing from the back of the carpet tile. Carefully place the carpet tile down in the empty spot in the floor. Once the carpet tile is set in the correct space, gently press the tile down so that it will stick to the floor well.
- Do not move the tile or touch the area for at least six to eight hours so the tile has time to set completely.