How to Disinfect Swimming Pools

Did you know that each time you swim in a swimming pool you are infecting the water with microorganisms? After oxidation a disinfectant must be added to the water to kill the microorganisms. By following this simple guide, you will be able to kill microorganisms when you disinfect your swimming pool.

1. Remove any debris from the pool. Begin by sweeping any surfaces or decks surrounding the pool. Then you must use a skimmer to remove any leaves or dirt in the pool. Additionally, you must install a new filter to replace the old one to eliminate possible contaminates. You will filter the water through the system after it has been disinfected.

2. Disinfect with chlorine. By following the package directions, sprinkle the chlorine granules in the pool. It will take about 30 minutes for the granules to mix and settle.

3. Turn on the filter. Allow the filter to process the water through to eliminate any leftover chlorine granules.

4. Test the chlorine level. The chlorine level should run at about 3.0, if the number is any higher it will not be safe to swim in yet, because at higher levels it is toxic.