How to Drain the Radiator on a 2006 Subaru Tribeca
The Subaru Tribeca is a sports utility vehicle manufactured by Subaru, and the 2006 release served as the launching point for this model. Subaru Tribeca owners must have the radiator drained periodically to flush the system or to replace the radiator with clean fluids. This is a simple procedure that can be completed by novice mechanics.
- Prepare the automobile for the procedure. Place the car in park, secure the parking brake and turn off the Tribeca's engine. Wait approximately one hour to ensure the engine and radiator fluid is thoroughly cooled before proceeding.
- Open the hood of the Tribeca. Secure the hood by setting the safety bar in an upright position.
- Locate the car's radiator, which will be positioned near the front of the engine. Find and remove the radiator cap. This step helps to release pressure in the Tribeca's radiator.
- Slide underneath the Subaru Tribeca, taking a drain pan with you. When underneath the car, pinpoint the location of the radiator's drain cock. The drain cock on the 2006 Subaru Tribeca is made of plastic.
- Place the pan under the cap, and then slowly unscrew the drain cock. In some cases, a pair of pliers may be necessary to loosen the drain.
- Allow the radiator fluid to drain completely. Replace the drain cock. Ensure the radiator's drain cock is secure using pliers.
- Replace the radiator cap, and close the hood of the Tribeca.
- Place the radiator fluid in a secure container. Take it to an automotive center or recycling facility that offers automotive fluid recycling services.