How to Embroidery Stitch by Hand
Embroidery is the process of adding needlework to fabric, usually for the purpose of decoration. Machines commonly create embroidery and it can also be done by hand. Hand embroidery typically uses a pattern, although it can also be done in a freehand style.
Things You Need:
- Embroidery pattern
- Iron
- Fabric
- Embroidery hoop
- Embroidery needle
- Thimble
Instructions:
- Select an embroidery pattern. This may be part of an embroidery project, a commercial design or a design that you create. An embroidery pattern uses a type of ink and paper that allows you transfer the design to fabric by using heat.
- Place the embroidery pattern face down on top of the fabric where you wish to make the embroidery. Press down on the pattern with a hot iron according to the instructions for the pattern. This process transfers the pattern to the fabric.
- Position the fabric over the ring of the embroidery hoop with the embroidery pattern facing up. Slide the hoop over the fabric and adjust the screw on the hoop to keep it taut. You may need to tighten the adjusting screw throughout the sewing process.
- Thread an embroidery needle with floss of the type and color specified by the pattern. Place a thimble on your thumb and push the needle up through the bottom side of the fabric. Leave a tail under the fabric that is about two inches in length. Push the needle back down through the fabric and pull the thread tight.
- Continue sewing by following the stitching indicated by the pattern. Place the tail of the thread on the back of the fabric when you need to change the thread.
- Loosen the adjusting screw on the embroidery hoop and reposition the hoop when you complete a section. Tighten the screw and begin sewing the next section. This may require you to place the hoop over existing stitches.