How to Make Embroidery Thread
Making your own embroidery thread is a challenging endeavor, but if you are able, you will be rewarded with unique colors in your stash of thread with bold and vibrant colors. You can dye and spin cotton fiber into thread, but silk fiber is preferred by true crafters.
Silk fiber is preferred because it retains color better, resulting in rich vibrant colors and has a luminosity and sheen that is unmatched. It’s also easier to dye and requires a shorter amount of time.
Dye Fiber
- Soak 1 pound of silk fiber roving for 30 minutes in 2½ gallons of warm water. Add ½ teaspoon of mild dish washing liquid to help remove the gummy coating called sericin.
- Put ¼ cup boiling water into a measuring cup and mix in 1 cup of acid dye powder. Add another ¾ cup of boiling water to make your dye solution. Set aside.
- Use a large pot and fill with 2½ gallons. Use water between 75 and 95 degrees Fahrenheit. You can use an instant thermometer to check the temperature. Add the dye solution to make a dye bath.
- Drain and rinse the silk fiber. Move to the dye bath.
- Heat the dye bath to 185 degrees Fahrenheit and simmer for 30 minutes. Stir the silk fiber gently; you don’t want to melt the silk fiber. After the half hour is up, if there is still some color in the bath, add ¼ cup white vinegar and simmer another 10 minutes.
- Cool the dye bath to room temp, leaving the silk fiber in the pan. After cooling, move to the sink and gently rinse until no color comes off the fibers. Squeeze out the excess water and hang fiber to dry.
Making Thread
- Pull a bit of the silk fiber from one end of the roving and catch the fiber on the starter thread in a spinning wheel.
- Do a long draw. This is when you draw the twisting silk fibers and roving back towards yourself with your dominant hand. This lengthens the thread.
- Place your opposite hand between the wheel and your dominant hand; use your fingers to stop the thread as you draw back. Then release your fingers to allow the spinning wheel to pull in the long thread.
- Adjust the spinning wheel tension if the thread needs more or less twist to hold the fiber together.
- Use two full bobbins of silk thread and spin together. The spinning wheel should be turning in the reverse direction to create a two-ply embroidery thread.